Choose a sky flyer fair ride by matching the Flying Chair's site envelope, passenger capacity, ride cycle and electrical requirements to your project. The GKFX36B is suited to plans that can accommodate its listed dimensions and 36-passenger configuration.
A suitable sky flyer fair ride must fit the available plot and its operating space. The GKFX36B Flying Chair has the following configuration:
| Parameter | GKFX36B value |
|---|---|
| Equipment height | 52m |
| Operating height | 40m |
| Turning diameter | 13.1m |
| Expansion diameter | 22.84m |
| Floor area | 26m * 30m |
Use the 26m * 30m floor area when reserving the ride zone. Compare the 52m equipment height and 40m operating height with the site layout, then review the 13.1m turning diameter and 22.84m expansion diameter against nearby attractions and circulation areas.
The GKFX36B carries 36 people in 18 cabins. Its operating period is 180S, with a speed of 9.8 rpm and a maximum cabin swing angle of 50.5°.
This configuration fits a park or fairground plan built around group capacity and a rotating aerial attraction. Use the 36-person capacity and 180S operating period when planning passenger flow and the expected spacing between ride cycles.
What to weigh
The ride uses 67KW drive power and has an installed capacity of 80 kVA. Its power supply is 3N+PE 380V/220V 50HZ.
Ask the electrical contractor to compare these values with the supply planned for the ride location. Keep the lifting speed, 0.5m /s, in the equipment schedule so the site and ride configuration refer to the same model.
Our advice
Choose the GKFX36B when the site fits its listed dimensions and the electrical plan matches its power supply. Check the site envelope, utility arrangement and passenger-flow plan before ordering.
Your shortlist
Select the GKFX36B Flying Chair when your site can accommodate its listed height, floor area and operating envelope, and when the electrical plan matches 3N+PE 380V/220V 50HZ. It also suits an attraction plan that uses a 36-passenger, 18-cabin arrangement with a 180S operating period.
Before requesting a quotation, send the intended site dimensions, electrical supply details and passenger-flow plan. These details let the requested configuration be checked against the project conditions.
The company
Hebei Zhipao Amusement Equipment Manufacturing Co., Ltd is a company which contains high altitude rotation,high altitude rise and fall,track glide,dynamic cinema and other equipment. It’s a professional large-scale amusement equipment manufacturing company which research and develop the equipment, equipment manufacturing, equipment installation, amusement park planning and marketing and so on.The registered capital of the company is 60 million yuan.…
About Us ↗Visit company website ↗